Advertisement
4.5.6 Hardware Settings
Value Range
Parameter
(default)
Stop Bit Length
1. 1 bit
2. 2 bits
4.5.6.2 Port Setting
The VPS must be connected to a PBX telephone line port before system start up.
System Administration Top Menu → 1 → 6 → 2
Program – Hardware Menu
Note:
Port Setting Menu
System Administration Top Menu → 1 → 6 → 2 → Port No. (1-12)
Program – Hardware – Port Setting Menu
Port Number [1]
Specifies the number of bits used to signify the
end of the byte.
(1)
1. RS-232C
2. Port Setting
3. PBX Interface Parameters
Enter the Port Number (1-12) =
Current Card Configuration
SLOT1:PORT1 PORT2 PORT3 PORT4
SLOT2:PORT5 PORT6 PORT7 PORT8
SLOT3:
You can assign parameters for all 12 ports. However, the location
of currently valid ports (Max.8) is displayed under "Current Card
Configuration" on the screen above.
Flash Time -------------------------------------------------------------- : 100
CPC Signal ------------------------------------------------------------- : 6.5
Disconnect Time ------------------------------------------------------ : 2
Dial Mode --------------------------------------------------------------- : DTMF
1:100 msec 2:300 msec 3:600 msec 4:900 msec
Description/Function
System Administrator
Reference
Data
Terminal or
Printer
Connection
p.2-22
4-77
Advertisement
Chapters
