Advertisement
7.1
Utility Commands
7.1.9 Print All of the VPS Parameters (GPRN)
Prints out all VPS parameter settings (output to screen).
Type "GPRN", then press [RETURN].
$ GPRN
0: All Parameters
1: Mailbox Setting
2: Class of Service Setting
3: Port Service Setting
4: Service Setting - Auto. Attn. Setting
5: Service Setting - Custom Service Setting
6: System Parameter Setting - System Group Assignment
7: System Parameter Setting - Day Service, Holiday, Daylight Saving Time
8: System Parameter Setting - Prompt Setting
9: System Parameter Setting - Others
10: Hardware Setting
11: System Reset Clear Parameter
Please select : 1
Program – Mailbox Setting – Mailbox Listing :
MAILBOX No. [201]
1. The Extension of the Owner [208]
2. The Spelling of the Owner First Name [
3. The Spelling of the Owner Last Name [
4. Mailbox Class of Service No. [ 1 ]
5. The Covering Extension [
6. Interview Mailbox Number [
7. All Calls Transfer to Mailbox [ No ]
MAILBOX No. [202]
1. The Extension of the Owner [
Note:
7.1.10 Program Version Display (VERS)
The version numbers of the hard disk, main ROM and Port card are displayed on
the screen.
Type "VERS", then press [RETURN].
$ VERS
V.P.S. PROGRAM VERSION
MAIN DISK :
MAIN ROM :
7-10
Maintenance
]
]
]
•
•
•
This command is only valid in the "ASCII terminal" mode.
MC-Service
]
]
Advertisement
Chapters
