Advertisement
4.3.1 Quick Setup
Quick Setup provides a quick way of system setup. You must initially set the
following programming items to start the VPS operation.
Depending on your PBX type, some steps can be skipped as shown below.
KX-T308/T616
KX-T1232/TA series/T96/T336, non-Panasonic system
KX-TD816/1232/500/308
Starting the Quick Setup
At the System Administration Top Menu, type "5" and press [RETURN]. (Only
available in the VT100 mode)
System Administration Top Menu → 5
Quick Setup Utility for connection to Panasonic KX-T series telephone systems
This utility provides a quick way of programing the Voice Processing System
to operate in a standard automated attendant or voice mail configuration when
connected to a Panasonic KX-T series telephone system. The system will prompt
you to enter, modify or confirm settings based upon which PBX type you select.
By entering the appropriate information in the following screens, the system
sets PBX integration parameters, identifies the extension numbers connected
to it, creates default mailboxes, sets its ports to handle callers with
automated attendant or voice mail service, sets system passwords and sets
the time and date. Finally, it confirms that you want to activate the system
based on the information you entered, modified or confirmed.
To proceed, press Enter. To exit and cancel Quick Setup now, press \ .
Note:
Utility Command "QSET" is also available for starting the Quick Setup.
See page 7-14.
4-8
System Administrator
1. PBX Type
2. Extension numbers of VPS ports
3. Extension numbers for mailboxes
4. Creating Mailboxes
5. Port Service Setting
6. Password Setting
7. Date and Time Setting
8. Activating the Quick Setup
PBX Type
–16–
Required Procedures
1 2
3
4
5
6
1
3
4
5
6
1
4
5
6
7
7
7
Advertisement
Chapters
