Advertisement
3
Features and Services
(b)
Conditions
• Each code must be set in System Programming according to the PBX codes.
• If your PBX is a Panasonic KX-T series telephone system, the Inband
Integration codes will automatically default to the proper codes.
S.A.
• Dialing Parameters (page 4-78)
• Inband Signaling Parameters (page 4-83)
• Digit Translation Table Parameters (page 4-85)
When activated, the PBX sends the digits of the mailbox number of the
called extension with DTMF tone to the VPS before connecting the
caller.
These digits are commonly known as the Follow-on ID.
As a result, the caller who does not know the mailbox number of the
called extension can leave a message.
DTMF tone Integration
This integration works together with Automated Attendant service of
the VPS.
When activated, the PBX informs the VPS of the state of the call (busy,
answered, ringing, etc.) by sending a code with DTMF tone before
sending the normal call progress tone (busy tone, ringback tone, etc.).
These codes enable the VPS to immediately recognize the current state
of the call and improve its call handling performance.
I
Features
3-27
Advertisement
Chapters
