Demo Function; Setting The Time.9 - Panasonic SC-AK20 Operating Instructions Manual

Demo
function
The demo function changes the display to an air plane taking off from
an airport.
Turning the demo function ON/OFF
Press POWER and hold down DISPLAY/DEMO.
Every lime you hold down the button;
DEMO (ON) <—> NO DEMO (OFF)
When the demo function is ON, the demo is played automatically
in the following cases.
• When power is ON
If the input source is set to CD or tape, and the system is left on
standby for more than 2 minutes
• When power Is OFF
If the clock has not been set
Setting the time
This is a 12-hour display clock.
This example in the figure shows how to set the time for 6:25 p.m.
Switch on the power.
© Press CLOCK/TIMER to select "CLOCK'
Every time you press the button;
CLOCK -> ©REC ^ ©PLAY
-Previous display <-'
© (within 5 seconds or so)
Press MEMORY/SET.
© Press
V
or
A
to select the hour.
© Press MEMORY/SET.
@ Press
V
or
A
to select the minutes.
© Press MEMORY/SET to finish setting the time.
The display will return to whatever was displayed before
you set the time.
To display the time when power is ON
Press CLOCK/TIMER to select "CLOCK".
The time will be displayed for about 3 seconds and then the display
will return to whatever was previously displayed.
9