Installation Sequence Siting Dhw Cylinders (Up To 300 L); Fitting The Cylinder Temperature Sensor And Thermometer Sensor (If Supplied) - Viessmann VITOCELL 100-V Installation Instructions Manual

Siting DHW cylinders (up to 300 l)

Fitting the cylinder temperature sensor and thermometer sensor (if supplied)

8.
8. 2.
3.
Fig. 5
■ 300 l: Sensor retainer is supplied with the fascia.
Secure the sensor on the outside of the sensor
■
retainer contact spring (not in the groove) so that it is
flush with the front of the spring.
■ Never wrap insulating tape around the sensor.
8
1.
4.
5.
7.
6.
■ Insert the sensor retainer together with the sensor as
far as they will go into the sensor well.
Insert the thermometer sensor as far as it will go into
■
the clamping bracket on the flange cover.