Installation Sequence; Vitocell Without Fitted Solar-Divicon; Siting And Levelling The Vitocell - Viessmann VITOCELL 140-E Installation And Service Instructions Manual
Solar buffer cylinder
Hide thumbs
Also See for VITOCELL 140-E:
Table of Contents
Advertisement
Vitocell without fitted Solar-Divicon
See page 16 for installation of the version with fitted
Solar-Divicon (accessories).
Siting and levelling the Vitocell
!
Please note
The thermal insulation must not come into con-
tact with naked flames.
Exercise caution when welding and brazing.
1.
A
2.
B
Fig. 4
Type plate
A
B
Bag with 3 adjustable feet
Insert the adjustable feet into the legs as far as possi-
ble, then adjust them to level the heating water buffer
cylinder.
Note
Never extend the adjustable feet beyond a total length
of 30 mm.
4.
3.
3x
If no electric immersion heater is being installed, seal
the front female connection with the supplied plug R1
.
½
Installation sequence
9
Advertisement
Table of Contents
