Viessmann VITOCELL 140-E Installation And Service Instructions Manual page 13

Vitocell without fitted Solar-Divicon
2.
Fig. 9
1. At the back of the cylinder: Attach 6 clip fasteners
to the edges of the right and left sections of the
insulation jacket. Place the thermal insulation jacket
around the cylinder body.
Note
Leave the clip fasteners in the first notch.
2. Fit 4 clip fasteners above and 2 clip fasteners
behind the Vitotrans so that they are evenly
spaced.
(cont.)
1.
3.
4.
3. Push the clip fasteners as close together as possi-
ble.
4. Install the immersion heater EHE or seal the hole
with a cover.
Installation sequence
13