Setting Up The Unit To Connect To Your Home Network Through The Instant (S-Iws) Connection; Setting Up A Proxy Server Manually - Sony NAS-Z200IR Operating Instructions Manual

Wireless network audio system
Hide thumbs Also See for NAS-Z200IR:
Table of Contents

Advertisement

Setting up the unit to connect
to your home network
through the Instant (S-IWS)
connection
If you have the Sony "GIGA JUKE" Music Server
and are using Instant (S-IWS) connection to
connect to your home network, you can use
Instant (S-IWS) connection to set up the wireless
network.
1
Select [Settings] from the Home
menu.
Settings menu appears.
2
Select [Network Setting].
"Switch to Home Network, when the setting
is completed. " appears in the display. Select
[OK] to continue the operation.
3
Select [Connection Setting] – [Instant
(S-IWS)].
Follow the instructions that appear in the
display.
4
When "Instant (S-IWS) setting with
wireless station is completed. "
appears, select [OK].
The unit changes to the Home Network
function and the server selection display
appears. For details on playing audio data
stored on a computer, see "Playing audio
data stored on a computer" (page 34). For
details on listening to the Internet radio, see
"Listening to the Internet radio" (page 33).
Note
Instant (S-IWS) connection is recommended when
the unit is only connected to your "GIGA JUKE"
Music Server as a server. When connecting the unit
to a computer, the manual connection or the AOSS
connection is recommended as it can obtain a security
level higher than that of the Instant (S-IWS) connection.
Use the manual connection or the AOSS connection if
higher security level is a priority.
Setting up a proxy server
manually
You may have to set up a proxy server, depending
on the specifications of your Internet provider or
the network settings.
1
Select [Settings] from the Home
menu.
Settings menu appears.
2
Select [Network Setting].
"Switch to Home Network, when the setting
is completed. " appears in the display. Select
[OK] to continue the operation.
3
Select [Proxy Setting] – [On].
Specify the IP address and port number, and
then press and hold ENTER.
4
When "Switch proxy settings. "
appears, select [OK].
The unit changes to the Home Network
function and the server selection display
appears. For details on playing audio data
stored on a computer, see "Playing audio
data stored on a computer" (page 34). For
details on listening to the Internet radio, see
"Listening to the Internet radio" (page 33).
21
GB

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nas-z200dir

Table of Contents