Deactivating The Demonstration; Inserting Batteries - Sony MHC-V21 Operating Instructions Manual

AUDIO/PARTY CHAIN OUT
• •
L/R jacks
•
— Connect to the audio
input jacks of an optional
equipment.
•
— Connect to another audio
system to enjoy the Wired
Party Chain function
(page 34).
 AC power cord (mains lead)
Connect the AC power cord
(mains lead) (supplied) to the
unit, then to the wall outlet.
The demonstration (page 18)
starts automatically. If you press
 (power) to turn on the system,
the demonstration ends.
Deactivating the
demonstration
To deactivate the demonstration
while the system is turned off, press
DISPLAY repeatedly to select the no
display mode (Power Saving Mode)
(page 18).
16
US

Inserting batteries

Insert the two supplied R03 (size
AAA) batteries, matching the
polarities shown below.
• •
• •
To wall outlet
To operate the system using the
remote control
Point the remote control at the unit's
remote control sensor.
Note
Do not mix an old battery with a new
one or mix different types of batteries.
If you do not use the remote control
for a long period of time, remove the
batteries to avoid damage from battery
leakage and corrosion.