Table of Contents
Advertisement
Installing the unit on the wall
The unit can be installed on the wall using the Wall-mount bracket SU-WL100 (not supplied).
To customers
Sufficient expertise is required for installing this product. Be sure to subcontract the installation to Sony
dealers or licensed contractors and pay special attention to safety during the installation. Sony is not
liable for any damage or injury caused by mishandling or improper installation, or installing any other
than the specified product. Your Statutory Rights (if any) are not affected.
To Sony Dealers
The following instructions are for Sony Dealers only. Be sure to read safety precautions and pay special
attention to safety during the installation, maintenance and checking this product.
Before installing the unit on the wall
Make sure that the wall is strong enough to support the wall mounting. The wall should be able to
support the weight of at least 20 times that of this unit. See "Specifications" (page 67) for the weight of
this unit.
Make sure that the power cord is disconnected from the wall outlet.
Make sure that the screws remain securely tightened during the assembly process, to avoid the unit
from falling or causing an accident.
Safety information
Only qualified service personnel should carry out wall installations.
For safety reasons, it is strongly recommended that you use Sony accessories, including:
— Wall-mount bracket SU-WL100
It is strongly recommended that you use a Sony Wall-mount bracket in order to provide adequante air-circulation.
0
GB
Advertisement
Table of Contents
