Update Method 1: Automatic Update Via The Internet - Sony SA-V90DW Help Manual

Help Guide
Home Audio System
MHC-V90DW

Update method 1: Automatic update via the Internet

When you use the home audio system while connected to the Internet via a wired or Wi-Fi network, the home audio
system can update to the latest software automatically.
This feature is disabled by default.
To update software automatically
Launch SongPal on your smartphone, iPhone, etc., and set on [System] in the [Settings] menu.
The automatic software update feature ([Auto Update]) of the home audio system is activated. If [Auto Update] is
disabled, change the setting to enable.
The update is performed when you are not using the home audio system, such as during midnight or when the home
audio system is in standby mode. During an update, the information of the update's progress appears on the display,
and [UPDATED] appears on the display when the update is complete. When the home audio system is turned on for
the first time after updating, [UPDATED] appears on the display.
To deactivate the software automatic update
Disable [Auto Update] in the [Settings] menu by using SongPal installed on a smartphone, iPhone, etc.
However, the software may still be updated automatically for critical changes, even if you disable this function.
If [NETWORK ERROR] or [DOWNLOAD ERROR PUSH POWER] appears on the display
The software update has failed.
If the network connection is not reliable, the update may fail before it completes. See the following to update using a
USB flash drive.
Manual update via a USB flash drive (when the update via a network has failed)
Hint
Do not turn the home audio system off during the update.
When the home audio system is connected to the Internet via a wired or Wi-Fi network, [UPDATE] lights up on the display when
the home audio system detects a new software version.
Regardless of the [Auto Update] setting, [UPDATE] lights up on the display when the home audio system detects a new software
version.
You can update the software manually even when the [Auto Update] setting is activated. See
via the Internet."
Note
Updating normally takes 3 to 10 minutes. It may take longer depending on your network environment.
Do not operate the home audio system or remote control during an update. Also, keep the home audio system connected to the
power supply and network while updating.
While updating via the Internet, you can terminate the update procedure by pressing the
or touching the (stop) key on the home audio system when [DL XX%] appears on the display (This is not always possible). If
you cancel the update, [CANCEL] appears on the display and [UPDATE] will stay lit on the display again.
4-694-845-31(2) Copyright 2017 Sony Corporation
43
"Update method 2: Manual update
(stop) button on the remote control