Marking track
numbers
(for the customers who purchased
MDS-MX101 only)
When you record from a CD (digital
recording), the track numbers are
automatically marked. In addition, you can
mark track numbers:
• At any point while recording.
• Automatically while recording.
Marking track numbers at
a specific point while
recording
– Level Syncro recording
You can mark track numbers at any time
while recording, regardless of the type of
sound source.
MD deck (option)
Press •REC while recording at the point
you want to add a track mark.
38
§
0
)
· P
p
=
+
• REC
Marking track numbers
automatically while
analog recording
The MD deck adds track marks differently in
the following cases:
• When recording from CDs
The MD deck marks track numbers
automatically. The track numbers are
marked as they are found on the original.
• When recording a radio programme or
from a tape
While "LEVEL-SYNC" lights up, the MD
deck marks a new track number whenever
the signal level drops and rises to a certain
point.
If "LEVEL-SYNC" does not light up, do as
follows.
MD deck (option)
0
=
1
2 3,4
§
)
· P
p
+