Editing; Before You Start Editing - Sony CMT-101 Operating Instructions Manual

1
Press •REC.
The MD deck stands by for recording.
2
Press EDIT/NO on the MD deck
repeatedly until "LevelSync?"
appears.
3
Press YES on the MD deck.
"LevelSync ON?" appears.
4
Press YES again.
"LEVEL-SYNC" lights up in the display
of the MD deck.
5
Start recording.
To cancel Auto Track Marking
Press EDIT/NO on step 4. "LEVEL-SYNC"
disappears. In this way, a track number is
marked only at the beginning.
Before you start

editing

(for the customers who purchased
MDS-MX101 only)
Be sure to remove an MD after editing
because programme you made is put on
record on an MD when an MD is removed.
About editing the MD
When you edit recorded tracks, there is no
need for copying the MD.
• Erase – Erasing recordings
Use the Erase Function (see page 40). This
lets you erase a single track one by one or
all tracks at once.
• Move – Changing the order tracks
Use the Move Function (see page 42) to
change the track numbering.
• Divide – Marking track numbers on
recorded radio programms
Use the Divide Function (see page 43) to
add track numbers. This lets you find your
favorite phrases quickly and play them
repeatedly.
• Combine – Combining recorded tracks
Use the Divide and Erase Functions to
erase unwanted portions, then put several
phrases into a single track using the
Combine Function (see page 44).
• Undo – Canceling the last edit
Use this function to cancel the last edit and
restore the contents of the MD to the
condition before the edit (see page 45).
• Name – Labeling MDs
Use this function to label MDs and tracks.
You can use upper case, lower case,
number and symbol for the titles (see page
46).
By using the editing functions in this way,
you can create original MD albums.
39