Labelling A Cd - Sony CMT-101 Operating Instructions Manual

Programming the CD tracks
–– Programme Play (continued)
To change the programme
To
Add a track at
the end of the
programme*
Clear the entire
programme
Clear the last
programme
* You can also add a track during playback when
you select tracks with the number button on the
remote (a in step 3).
Tips
• The programme you made remains after the
Programme Play has finished. To play the same
programme again, press ^ (CD ( on the
remote).
• The step number appears in the display by
pressing DISPLAY in stop mode.
Notes
• The total playing time is not displayed when the
total programme time exceeds 100 minutes .
• If you try to programme more than 25 tracks,
"STEP FULL" is displayed.
26
Do this
Do steps 3 and 4 in stop
mode.
Press p on the tuner CD
player in stop mode.
Press CLEAR.
Each time you press the
button, the last track of the
programme is cleared.

Labelling a CD

You can label up to 35 CDs using up to 10
symbols and characters on each CDs.
Whenever you insert the labelled CD, the
labell (disc name) appears in the display.
Tuner CD player
POWER
0
=
Remote (inside)
1
5,6,7
1
Press FUNCTION repeatedly until
"CD" appears in the display of the
tuner CD player, then insert a CD.
2
Press EDIT/NO repeatedly until
"Name in ?" appears.
3
Press YES.
The cursor starts flashing.
1
§
) · P p
+
p
1
2
3,8
4