Basic Operations; Playing A Cd - Sony CMT-101 Operating Instructions Manual

Basic Operations

Playing a CD

Tuner CD player
POWER
0
=
=0/
VOL +/–
)+
1
Insert a CD.
The CD is pulled in and
With the label
side up.
2
Press ^ (CD ( on the remote).
The first track starts playing.
1
6
§
)
· P p
+
p
2
appears.
§
0 ) · P p
=
+
To Do this
Press p.
Stop play
Press ^ (P on the remote).
Pause
Press again to resume play.
Press )+ (to go forward)
Select a track
or =0 (to go back) (+ or
(AMS*)
= on the remote).
Press )+ or =0 and
Find a point in
hold on () or 0 on the
a track
remote) and release it at the
desired point.
Press 6.
Remove the CD
Adjust the Press VOL + or –.
volume
* AMS: Automatic Music Sensor.
Tips
• If you do not remove a CD after pressing 6, a CD
is pulled in automatically after about 15 seconds to
protect a CD.
• Inserting a CD turns the power on automatically.
• Pressing ^ (CD ( on the remote) when the
power is off automatically turns the power on and
starts CD playback if there is a CD inside (One
Touch Play).
• You can switch from another source to the tuner
CD player and start playing a CD just by pressing
^ (CD ( on the remote) (Automatic Source
Selection).
11