Recording A Cd On An Md - Sony CMT-101 Operating Instructions Manual

Recording a CD on an
MD
— CD Synchro Recording
(for the customers who purchased
MDS-MX101 only)
You can make a digital recording of a CD on
an MD, marking track numbers in the same
sequence as the original CD. If you use a
recorded MD, the MD deck automatically
locates the end of the recording and starts
recording from there.
Tuner CD player
POWER
MD deck (option)
1
Insert a CD.
The CD is pulled in and
With the label
side up.
12
1
6
§
0 ) · P p
= +
3
2
6
§
0
) · P p
= +
4 5 6
appears.
0 ) · P
=
+
2
Insert a recordable MD.
The MD is pulled in and
With the arrow
pointing toward
the deck.
With the label
side up.
3
Press FUNCTION repeatedly until
"CD" appears in the display of the
tuner CD player.
4
Press CD SYNC.
The MD stands by for recording and the
CD is in pause for playback.
5
Press ^ on the MD deck.
Recording starts.
When recording is finished, the MD
stands by for recording and the CD stops
automatically.
6
When recording is finished, press p
on the MD deck to stop recording
and remove the MD.
Be sure to remove an MD after recording
because programme you made is put on
record on an MD when an MD is
removed.
To
Stop recording
Pause
Remove the CD
Remove the MD
While "TOC" lights up or is
flashing
Do not move the deck or pull out the mains
lead to ensure the complete recording. The
deck updates the Table of Contents (TOC)
§
while "TOC" is flashing.
p
appears.
§
0 ) · P p
= +
Do this
Press p on the MD deck.
Press ^ on the tuner
CD player.
Press 6 on the tuner
CD player.
Press 6 on the MD deck.