Recording To A Tape; Cd Synchro Recording; High-Speed Dubbing/Recording; Manually/Program Edit - Sony MHC-DP1000D Operating Instructions Manual

Recording to a tape

— CD Synchro Recording/High-Speed Dubbing/Recording Manually/Program
Edit
You can record from a DVD, VIDEO CD, CD, tape, radio or other connected component. You can
use TYPE I (normal) or TYPE II (CrO
Recording from a VIDEO CD/CD
Steps

(CD Synchro Recording)

1 Insert a recordable tape into deck B.
Press DVD.
2
Insert the disc you want to
3
record.
Press CD SYNC HI-DUB.
4
Deck B stands by for recording.
The REC PAUSE/START button flashes.
To reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that "DOLBY
NR" appears in the display (except when recording from a tape).
Press DIRECTION repeatedly to select g to record on one side.
5
Select j (or RELAY) to record on both sides.
Press REC PAUSE/START.
6
Recording starts.
7
To Press
x.
Stop recording
Pause recording* REC PAUSE/START.
* Only when recording manually.
Tips
• If you want to record from the reverse side, press
TAPE A/B to select deck B and press nN to
start playback of the reverse side after step 1. Press
x where you want to start recording.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• (High-Speed Dubbing only)
If you set direction to j when the tapes have
different lengths, the tapes in each deck reverses
independently. If you select RELAY, the tapes in
both decks reverse together.
) tapes. The recording level is adjusted automatically.
2
Recording from a tape
(High-Speed Dubbing)
Press TAPE A/B repeatedly
to select TAPE A function.
Insert the tape you want to
record into deck A.
Notes
• You cannot listen to other sources while recording.
• You cannot use the digipad during recording.
• If you change the setting of sound, such as changing
the preset effect file, while recording, the recording
sound is interrupted at the point.
• If you start recording with the 2CH/MULTI set to
"V.SEMI M.D.", "MULTI", or "V.M.DIMENS.",
the setting automatically changes to "2CH".
• CD synchro recording is not available with DVDs.
Recording Manually
Press a function button
for the recording
source.
Insert the disc, tape, or
tune in the station you
want to record.
Press REC PAUSE/
START.
Start playing the
recording source.
continued
GB
43