Using A Track Mark; Adding A Track Mark - Sony ICD-SX813 Operating Instructions Manual

Using a Track Mark

Adding a track mark

. , >
N /ENT
T-MARK
You can add a track mark at a point at
which you would like to divide a
or locate during playback. You can add a
maximum of 98 track marks to each file.
During recording, playing back, or pausing,
press T-MARK at the position you want to
add a track mark.
The (Track mark) indicator flashes three
times, and a track mark is added.
P Notes
• You can add a track mark only to files
recorded using the IC recorder. However,
when you edit files using the supplied Sound
Organizer software, adding a track mark to
the files may not be possible.
• You cannot add a track mark at a point
within 0.5 seconds from another track mark.
later
file
• You cannot add a track mark at the very
beginning or at the very end of the file.
• If there are already 98 track marks in a file,
you cannot add any more track marks.
• When a track mark is added during
playback, the playback stops.
Locating a track mark and
starting playback at the track
mark
Press
the stop mode. When the
indicator flashes once, press
or on the control button in
. >
(Track mark)
/ENT.
N
81 GB