Table of Contents
Advertisement
7.6
Setting the Water Temperature
The water temperature can be adjusted between 30°C
and 65°C. The heat pump alone heats the water up
until 55°C. Beyond this temperature, up to 65°C, the
electrical backup immersion takes over.
- Press 'Menu'.
- Turn the dial to scroll through the menu options:
TEMP SETT.
- Press 'Menu' to return to the main screen
- In order to get the best from your heat pump, we
recommend that you do not leave the set water
temperature too high unless necessary. The default
temperature is set at 55°C.
7.7
Holiday Mode
'Holiday' mode puts the appliance on standby whilst the
freeze protection mode remains active. This function
can be programmed to run between 1 and 99 days and
is effective as soon as the number of days has been
confirmed.
- Press 'Menu'.
- Turn the dial to scroll through the menu options:
HOLIDAYS
HOLI. RETURN. 8
- Press 'Menu' to return to the main screen.
'HOLIDAY' mode switches off automatically at the same
time when the number of days set has ended.
Throughout the holiday period, the heat pump water
heater shows 'Holi. Return.' on the display screen, as
well as a countdown of the days.
-To cancel holiday mode select 0 days
Set Temperature
TARGET +
60°C
Enter
Set number of days
in standby mode
Enter
Set-Up and Use
7.8
BOOST Function
The 'BOOST' function temporarily uses both the
immersion heater and the heat pump to increase the
temperature during a heating cycle. The "electrical
backup" symbol flashes while it is activated.
- Press 'Menu'.
- Turn the dial to scroll through the menu options:
BOOST
YES
- Press 'Menu' to return to the main screen
The 'BOOST' function is automatically deactivated as
soon as the set temperature is reached (end if heating
cycle).
- 'BOOST' can be cancelled by selecting 'no' in the
menu
7.9
Electric Mode
(to operate with electrical backup)
Electric mode uses only the immersion heater to heat
the water in the heat pump water heater. It provides a
back-up option if for any reason the heat pump is not
running (ducting not yet connected, dusty renovation
work being carried out near the appliance....). This can
be turned off if perferred.
- Press 'Menu'.
- Turn the dial to scroll through the menu options:
ELEC MODE
YES
- Press 'Menu' to return to the main screen.
(for occasional use)
Enter
Enter
17
Advertisement
Table of Contents
