Connection Of Personal Computer To Machines (For Connecting 4 Sets) - Brother BES-962BC Instruction Manual

2-7 Connection of Personal Computer to Machines (for connecting 4 sets)

Control box
Before inserting or removing IF cables or RS
cables, turn off the power switches of the
machine, the computer, and peripheral
equipment.
1. Turn off the power switch.
2. Open the cover of the personal computer and insert an interface board into the slot for the
PCI bus.
3. Connect the interface board male connector and the personal computer RS-232C connector
(COM1 or RS-232C-1) using the attached short RS cable.
CAUTION
BES-962BC • BES-1262BC
Chapter 2 Preparation of Embroidery Machine
(1st machine)
RC
cable
(2nd machine)
(3rd machine)
(4th machine)
Interface board
IF cable
IF cable
Terminator
(Be sure to attach
a terminator.)
39