Preparation For Embroidering; Upper Threading - Brother BES-962BC Instruction Manual

3. Preparation for Embroidering

Turn off the power switch before starting preparation.
Failure to do so may start the machine unintentionally through an accidental activation of the START switch,
resulting in bodily injuries.

3-1 Upper Threading

BES-962BC
eThread breakage
pulley
rUpper thread
guide (upper)
tUpper thread
guide (middle)
yThread guide
Inner thread
guide
uThread guide A
iLower thread
guide
oNeedle bar
thread guide
1. Pass an upper thread from the cotton stand through the hole of the thread guide right above
each cotton stand bar. Pass the thread from the back to the front hole.
2. Pass the thread through the upper hole of the pretension. Push up the thread guide tension
disc w with your finger, and pass it from the left to the lower hole.
q
wThread guide
tension disc
Rotary
tension
Spring
disc
BES-962BC • BES-1262BC
CAUTION
Needle Bar No.3,6,9
No.2,5,8
No.1,4,7
uThread guide A
iLower thread
guide
Chapter 2 Preparation of Embroidery Machine
43