Chapter 2 Preparation of Embroidery Machine
Sash frame (optional)
y
r
Attaching the sash frame
1. Set the table. (Refer to "2-4 Mounting of Table" (Page 32) for details.)
2. Mount two vertical sash frames q on the holder base frames L and R, and two horizontal
sash frames w on the X-axis feed frame e and the holder base frame C r, using the screws.
3. Set the material. Then, set sixteen sash clips 290 t horizontally on the upper and lower
sides, four sash clips 220 y vertically on the left and right sides.
54
q
r
t
BES-962BC • BES-1262BC
w
e
y
q
e
t
e
e