Lubrication To Needle Bar Case - Brother BES-962BC Instruction Manual

Brother sewing machine user manual
Hide thumbs Also See for BES-962BC:
Table of Contents

Advertisement

Chapter 2 Preparation of Embroidery Machine

2-6 Lubrication to Needle Bar Case

Proper lubrication is necessary for keeping the machine head in good condition.
Turn off the power switch before starting any cleaning work, otherwise the machine may operate if the start
switch is pressed by mistake, which could result in injury.
38
CAUTION
Before operating the machine for the first
time after unpacking or after leaving the
machine without operation for a long
period of time, supply one or two drops of
oil to two sections at the top and the bottom
of each needle bar. (See the left figure.)
Notes) • Use the Brother's specified embroidery
BES-962BC
BES-1262BC
BES-962BC • BES-1262BC
machine oil (Nisseki Embroidery Lube No.
10 or the equivalent).
• Supplying an excessive amount of oil will
cause dripping onto the material.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bes-1262Bes-962Bes-1262bc

Table of Contents