Page 1
Machine Reference Preparation (Note: You will not see a white window appear until you turn on the machine.) (Note: White window will appear.) Cancelling previous design Embroidery Cancel icon...
Page 2
(This will save the design in an ECS format)
Loading embroidery hoop to use (Note: If using some aftermarket hoops, such as a FastFrame, this step is optional.) Settings Load Hoop...
Page 7
(Note: These two folders are listed under C:\Program Files\BES-960.) BE-0901-PC, BE-1201-PC, BES-960, BES-962, BES-1240, BES-1260, BES-1262 BE-1204-PC, BE-1206-PC...
Page 9
Setting color sequence Needle Bar Change icon...
Page 12
Setting sewing speed (Note: 800spm for tubular and 700spm are good speed ranges to start with.) Speed range information Speed adjustment buttons...
Page 13
Sending design to the machine Send icon...
Page 14
Operations on the machine panel (Note: This will move the pantograph to match the position of the design in the hoop from the computer.) (Note: This step is to reconfirm that the design does fit in the hoop attached to the machine.)