Alcatel-Lucent 9962 Hardware Installation page 55

Multi-standard enterprise cell
Table of Contents

Advertisement

Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1
commissioning
....................................................................................................................................................................................................................................
Important! In case the configuration supports only one WCDMA cell, the LTE LED
is off. If the configuration enables WCDMA and LTE concurrent operation, the
WCDMA and LTE commissioning proceed simultaneously.
...................................................................................................................................................................................................
Return to the
2
E
N D
O F
...................................................................................................................................................................................................
Wi-Fi commissioning
The 9962 MSEC v1.0 integrated Wi-Fi module manages the Wi-Fi LEDs located at the
rear of the access point.
...................................................................................................................................................................................................
As soon as the access point is powered on, the 9962 MSEC v1.0 starts booting and the
1
Wi-Fi LEDs are solid on.
Figure 3-2 9962 MSEC v1.0 Wi-Fi LEDs
...................................................................................................................................................................................................
Then the 9962 MSEC v1.0 tries to get adopted by the 9772 Wi-Fi Service Controller and
2
the 5G LED starts blinking slowly. The 2G LED related to the 2.4GHz frequency is off.
...................................................................................................................................................................................................
3
This step is optional and occurs only in case of software updates pushed by the 9772
Wi-Fi Service Controller. If no software updates, see the next step.
Otherwise, the 2G LED starts blinking slowly while the 5G LED related to the 5GHz
frequency is off.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0002-RJZZA
Issue 2.01 September 2015
Step
8.
S T E P S
Commissioning process
3-5

Advertisement

Table of Contents
loading

Table of Contents