Table of Contents
Advertisement
Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1
installation
....................................................................................................................................................................................................................................
External antennas connections
The ceiling installation requires external antennas that have to be linked to the 9962
MSEC v1.0 access point with the appropriate jumper cables on the antenna SMA
connectors.
The table lists the jumper cables complying with the 9962 MSEC v1.0 antennas
connectors:
Order codes
1AB414660001
1AB425160001
1AB414570001
Power supply
The 9962 MSEC v1.0 access point can be powered through:
• DC input power with an AC-DC power adapter including an appropriate Jack,
• or 4p PoE compliant with PoH standard (following IEEE 802.3 at Power over
Ethernet standard).
If PoE compliant with PoH standard is used to supply the power then a PoE injector
or a PoE capable router can be used.
....................................................................................................................................................................................................................................
2-24
Description
Jumper Type N to SMA (1m – SMA Male / N
Female)
Jumper Type N to SMA (1m – SMA Male / N
Male)
Jumper Type N to SMA (2m – SMA Male / N
Male)
Cabling
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0002-RJZZA
Issue 2.01 September 2015
Advertisement
Table of Contents
