Alcatel-Lucent 9962 Hardware Installation page 36

Multi-standard enterprise cell

Table of Contents

Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1

installation

....................................................................................................................................................................................................................................

Note: Depending on the ceiling the device must be mounted to, different screw

fixings might be needed. After site survey, these mounting accessories must be

procured locally.

...................................................................................................................................................................................................

Connect the different cables. Refer to the procedure

...................................................................................................................................................................................................

Refer to the

jumper cables used to connect external antennas to 9962 MSEC v1.0.

Select the appropriate jumper cables and connect the external antennas to the dedicated

SMA connectors:

Figure 2-7 9962 MSEC v1.0 external antenna connector

...................................................................................................................................................................................................

Attach the 9962 MSEC v1.0 to the mounting plate as follows:

1. Line up the four (4) grooves in the back of the 9962 MSEC v1.0 with the four (4)

notches protruding from the mounting plate.

2. Push the 9962 MSEC v1.0 horizontally to lock it into position.

3. Then screw the four (4) screws (provided in the ceiling mounting kit) to attach the

9962 MSEC v1.0 to the mounting plate.

2-14

"External antennas connections" (p. 2-24)

Mounting guidelines

"Cabling" (p. 2-19)

for details.

paragraph to get details on the