Table of Contents
Advertisement
Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1
commissioning
....................................................................................................................................................................................................................................
Figure 3-1 9962 MSEC v1.0 front LEDs
...................................................................................................................................................................................................
After approximately 2 minutes the 9962 MSEC v1.0 access point will initialize and
2
establish IPsec connectivity. During this operation the Power status indicator will blink
slowly. Only red at the beginning then toggling red/green once the access point attempts
to contact DNS Internal for HDM/SAM address resolution.
...................................................................................................................................................................................................
After the 9962 MSEC v1.0 access point has established a network connection it will
3
automatically update its software and configuration database. This process takes
approximately 15 minutes. During this operation the Power indicator will blink green.
...................................................................................................................................................................................................
4
Once the software update has completed the 9962 MSEC v1.0 access point will carry out
an automatic reboot. During reboot the Power indicator will still be blinking green.
...................................................................................................................................................................................................
The access point is ready to enable applications and the Power indicator is solid green.
5
...................................................................................................................................................................................................
The 9962 MSEC v1.0 access point starts looking for a GPS signal: the GPS LED is
6
blinking red.
Important! If GPS signal is not available, the GPS LED turns off.
...................................................................................................................................................................................................
A soon as the GPS signal is acquired, the GPS LED goes solid green.
7
....................................................................................................................................................................................................................................
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0002-RJZZA
Issue 2.01 September 2015
Commissioning process
3-3
Advertisement
Table of Contents
