Alcatel-Lucent 9962 Hardware Installation page 32

Multi-standard enterprise cell

Table of Contents

Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1

installation

....................................................................................................................................................................................................................................

...................................................................................................................................................................................................

At the selected installation location, mark the points on the flat surface for the four (4)

fixing holes, using the holes in the mounting plate as a guide.

Check the horizontal position with a spirit level.

...................................................................................................................................................................................................

Drill holes at the marked points, and insert wall plugs into the fixing holes.

...................................................................................................................................................................................................

Attach the mounting plate to the wall using appropriate screw fixings.

Note: Depending on the wall the device must be mounted to, different screw fixings

might be needed. After site survey, these mounting accessories must be procured

locally.

...................................................................................................................................................................................................

Connect the cables. Refer to the procedure

...................................................................................................................................................................................................

Attach the 9962 MSEC v1.0 to the mounting plate as follows:

1. Line up the four (4) grooves in the back of the 9962 MSEC v1.0 with the four (4)

notches protruding from the mounting plate.

The following graphic shows the notches and the lock location on the mounting plate and

the grooves in the back of the 9962 MSEC v1.0:

2-10

"Cabling" (p. 2-19)

for details.

Mounting guidelines

Alcatel-Lucent 9962 MSEC v1.0

3MN-02001-0002-RJZZA

Issue 2.01 September 2015