Alcatel-Lucent 9962 Hardware Installation page 16

Safety and general information
....................................................................................................................................................................................................................................
Contact with energized parts can cause serious personal injury.
Seal off the installation area (warning tape, signs) to prevent untrained or unauthorized
persons from entering.
Follow safe work practices and lockout/tagout procedures.
Some parts of all electrical installations are energized. Failure to follow safe work
practices and the safety warnings may lead to bodily injury and property damage.
For this reason, only trained and qualified personnel (electrical workers as defined in
IEC 60215 or EN 60215 + A1 or in the National Electrical Code or in ANSI/NFPA No.
10) may install or service the installation.
The light from laser and high-radiance LED's may cause eye damage if absorbed by the
retina.
In the US consult ANSI Z136.2, in Europe consult IEC-60825 Safety of laser products, for
guidance on the safe use of optical fiber communication systems in the workplace.
Cabinet may tip when it is moved if an obstacle or a downward step is encountered.
Do not use dolly wheels if the installation location has an uneven surface, steps etc.
Cabinet eyebolts can break, severely damaging the cabinet, if a crane is used to lift the
cabinet into an upright position.
Ensure that the cabinet is in an upright position before transportation by crane.
....................................................................................................................................................................................................................................
1-4
WARNING
Electric-shock hazard
WARNING
Electric-shock hazard
WARNING
Laser hazard
WARNING
Falling-object hazard
WARNING
Overhead-load hazard
General hazard statements
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0002-RJZZA
Issue 2.01 September 2015