FABRIC:
NEEDLES:
THREAD:
PRESSER FOOT:
Instruction Manual pg.___
Serger Library – Tips and Tricks
Attach the Upper Looper Converter.
Following the directions in the Instruction Manual on page___ thread for a
Wrapped Edge using Jeans Stitch
Turn the Stitch Selection Dial to "B".
Serge one edge of the fabric. Engage Differential Feed if necessary.
If the Jeans Stitch
Looper Thread Tension. If the thread still does not wrap, remove the Jeans Stitch
from the Thread Guide#5 and try again. Wrap Stitch the other three edges of the
fabric.
Use Seam Sealant to seal the Wrapped Stitch at the corners. When the sealant is dry,
trim the thread tails.
Press and mount the sample.
WRAPPED EDGE
Heavy wool or polar fleece 4" X 5"
80/12 Universal
1 cone of serger thread (Needle)
1 cone of Jeans Stitch
Standard
Specialty Stitches
Simply Serging
in the Lower Looper.
does not wrap, thread tension may be too tight. Reduce the
1999 BERNINA Of America
(Lower Looper)
.
Section D - page 9