Bernina dcet 2500 Workbook page 39

SECTION C – 3-THREAD TECHNIQUES
W 3-T
IDE HREAD
Left Needle only
Used for:
Seaming stretchy knit fabrics
Finishing woven edges
Serging outside corners
C N
ENTER EEDLE
Used for:
Seaming fine fabrics
Finishing woven edges on linen and wool
Inside corners
Turning tubes
N O
ARROW VERLOCK STITCH
Center Needle
Stitch Selection Lever/Rolled Hem
Disengages the Stitch Finger.
Some minor tension adjustments may need to be made to the Loopers
Used for:
Seaming batiste and other fine fabrics.
Finishing the edge of fine fabrics.
3-
THREAD FLATLOCKING
Right Hand Seam Guide
Adjust for fabric guiding.
Position "D" on the Stitch Display Panel
Automatic Tension Adjustment for Flatlocking.
R H
OLLED EMMING
The Upper Looper thread is visible.
Woolly Nylon in the Upper Looper "fills in" like a sewing machine satin stitch.
Stitch Selection Lever/Rolled Hem disengages the Stitch Finger.
Position "C" on the Stitch Display Panel
Automatic Tension Adjustment for Rolled Edge
O
VERLOCK STITCH
O
VERLOCK STITCH
- Instruction Manual pg._____
- Instruction Manual pg._____
- Instruction Manual pg._____
1999 BERNINA Of America
- Instruction Manual pg._____
- Instruction Manual pg._____
Section C - page 1