Table of Contents
Advertisement
FABRIC:
NEEDLES:
THREAD:
PRESSER FOOT:
Instruction Manual pg._____
Feet-ures Unit____pg.________
Convert the serger from Overlock to Cover Stitch using the directions on
page__ in the Instruction Manual or on the Quick Reference card. Insert the
Right Needle and turn the Stitch Selection Dial to "G".
Set Stitch Length at 3.
Following the instructions on page ___ of your Instruction Manual, thread the
serger for a Chain Stitch.
With right sides together place the fabric under the Needles. Use the
on the Cover/Chain Stitch Extension Plate to position the fabric.
Chain Stitch the fabrics together. Continue stitching off the end of the fabric.
Following the directions on page ___ of the Instruction Manual, remove the chain
stitch.
Lift the toe of the Presser Foot and Chain Stitch the seam a second time.
Following the directions on page___ in the Instruction manual, secure the thread
tail.
Trim and mount the sample.
CHAINSTICH SEAM
2 pieces of medium weight cotton 1½" X 6"
80/12 universal
2 cones of serger thread
Cover Stitch or Standard
1999 BERNINA Of America
5
/
" mark
8
Section E - page 12
Advertisement
Table of Contents
