Table of Contents
Advertisement
FABRIC:
NEEDLES:
THREAD:
PRESSER FOOT:
Instruction Manual pg.___
Bernette
Advanced Guide Workbook Supplement I pg.___
Serger Library – Tips and Tricks
Attach the Upper Lopper Converter.
Following the directions found in the Instruction Manual on page___, thread
for a 2-thread Rolled Edge.
Turn the Stitch Selection Dial to "A".
Set Stitch Length to 1.75.
Pull the Stitch Selection Lever/Rolled Hem towards you.
Adjust Cutting Width to 2 (normal).
Place the fabric under the Presser Foot and serge one 6" edge cutting off
1
about
/
" as you serge.
8
Return the Stitch Selection Lever/Rolled Hem to normal sewing position (away
from you).
Press, trim, and mount the sample.
2-THREAD ROLLED HEM
Batiste 3" X 6"
70/10 Sharp or Microtex
2 cones of Metrolene serger thread
Standard
1999 BERNINA Of America
Section D - page 8
Advertisement
Table of Contents
