Table of Contents
Advertisement
FABRIC:
NEEDLES:
THREAD:
PRESSER FOOT:
Instruction Manual pg._____
Feet-ures Unit____pg.________
Cover Stitch Option
Convert the serger from Overlock to Cover Stitch. Insert the Left and Right Needles
and turn the Stitch Selection Dial to "F". Set Stitch Length at 3.
Thread the serger for a wide 3-Thread Cover Stitch.
Wrap the bias binding around one 6" side of the quilted fabric using 505
Spray to hold the binding in place.
Place the fabric under the Needles with the unstitched edge of the binding even with
the inside of the Left Floating Toe. The quilted fabric will lay to the left.
Cover Stitch the binding to the quilted fabric.
Chain Stitch Option
Thread the serger for a Chain Stitch using the Right Needle. Set the Stitch Selection
Dial to "G". Set Stitch Length at 3.
Wrap the bias binding around the other 6" side of the quilted fabric using 505
Adhesive Spray to hold the binding in place.
Place the fabric under the Needle with the unstitched edge of the binding even with the
inside of the Right Floating Toe. The quilted fabric will lay to the right.
Chain Stitch the binding to the quilted fabric.
Trim and mount the sample.
ATTACHING BINDING
Prequilted fabric 3" X 6"
20" of wide pre-folded bias binding
80/12 universal
2 or 3 cones of serger thread
Cover Stitch
1999 BERNINA Of America
Adhesive
Section E - page 13
Advertisement
Table of Contents
