Table of Contents
Advertisement
FABRIC:
NEEDLES:
THREAD:
PRESSER FOOT:
Instruction Manual pg.___
Bernette
Advanced Guide Workbook pg.___
Serger Library – Simply Serging
Specialty Stitches
Tips and Tricks
Thread the serger for a 3-thread Overlock stitch using the Center Needle.
Use the Woolly Nylon in the Upper Looper.
Turn the Stitch Selection Dial to "C" on the Stitch Display Panel.
Adjust the Stitch Length to 1.75.
Locate the Stitch Selection Lever/Rolled Hem on the Stitch Plate and pull it
towards you to disengage the Stitch Finger.
Cutting Width should be at 2 (normal).
Place the fabric under the Presser Foot and serge along one 6" edge.
Return Stitch Length to normal.
Return the Stitch Selection Lever/Rolled Hem to normal sewing position (away
from you).
Trim and mount the sample.
3-THREAD ROLLED HEM
Medium weight woven cotton fabric 3" X 6"
80/12 Universal
2 cones of serger thread
1 cone of Woolly Nylon
Standard
1999 BERNINA Of America
Section C - page 17
Advertisement
Table of Contents
