Table of Contents
Advertisement
ATTACHING ELASTIC WITH THE
FABRIC:
NEEDLES:
THREAD:
PRESSER FOOT:
Instruction Manual pg.___
Bernette
Advanced Guide Workbook Supplement I pg.___
Serger Library – Tips and Tricks
Instruction Manual for Elasticator Attachment
Attach the Upper Looper Converter.
Following the instructions on page ___ of your Instruction Manual thread the serger
for a Super Stretch Stitch using the Left and Center Needles. Use Woolly Nylon in
the Lower Looper.
Turn the Stitch Selection Dial to "B".
Adjust Stitch Length to 4.
Adjust the Presser Foot Presser Lever to "H" (increase).
Attach the Elasticator Foot.
Following the instructions in the Instruction Manual for Elasticator Attachment, thread
the elastic through the Presser Foot and adjust the Set Screw on the Roller Guide.
Place the fabric under the Presser Foot and serge attaching the elastic as you sew.
Trim and mount the sample.
SUPER STRETCH STITCH
Cotton or nylon Lycra 3" X 6"
12" of ½" nylon or cotton braid elastic
80/12 stretch or 11/75 ballpoint
2 cones of serger thread (Needles)
1 cone of Woolly Nylon (Lower Looper)
Elasticator Foot
1999 BERNINA Of America
Section D - page 4
Advertisement
Table of Contents
