Table of Contents
Advertisement
FABRIC:
NEEDLES:
THREAD:
PRESSER FOOT:
Instruction Manual pg._____
Bernette
Advanced Guide Workbook pg.____
Serger Library – Tips and Tricks
Following the diagrams on page ____ in the Instruction Manual, thread the
serger for a 3-thread Center Needle Overlock stitch.
Turn the Stitch Selection Dial to "A" on the Stitch Display Panel.
Adjust Cutting Width to 2 (normal).
Adjust Stitch Length to 2.5 (normal).
Pull the Stitch Selection Lever/Rolled Hem towards you to disengage the
Stitch Finger.
Adjust the Differential Feed Dial between 0.7 and N.
Fold the fabric in half to 2½" X 6".
Serge along the folded edge of the fabric. If necessary slightly tighten the
Looper Tensions (up) and re-stitch the seam.
Return the Stitch Selection Lever/Rolled Hem to normal (push the
lever away from you).
Return the Differential Feed Dial to "N" (normal).
Trim and mount the sample.
3-THREAD NARROW SEAM
Batiste 5" X 6"
80/12 Universal
3 cones of serger thread
Standard
1999 BERNINA Of America
Section C - page 11
Advertisement
Table of Contents
