WeB InTerfACe
sections
table of contents
Back Up and restore
You can back up all configuration data to restore it at a later date . To
do so:
From the menu, select "Backup & Restore" and Figure 25 appears .
Figure 25 Backup & Restore
To back up the configuration data, click
To restore the configuration data, browse to locate the file and press
. The device restarts .
OmniView
SMB CAT5 216/232 Switch
®
1
2
to save the file .
3
4
Saving Changes and logging Out
To save any configuration changes, click the relevant button on the
current page . This could be
To restart the Switch, press
To exit the Configuration menu and close the session, click
Only one administrator can log in to the Configuration area at a time .
After the idle timeout (see the "Security > Settings" section on page 21),
the session terminates .
25
5
or just
.
.
.