Web InTeRfaCe
sections
table of contents
set Time and date
The time and date set feature is used when recording log events. To set
the time and date:
From the menu, select "Time & Date" and Figure 25 appears.
Figure 25 Set Time & Date
Type the appropriate parameters.
OmniViewIP 5216K/5232K
1
2
3
4
back Up and Restore
You can back up all configuration data to restore it at a later date. To
do so:
From the menu, select "Backup & Restore" and Figure 26 appears.
Figure 26 Backup & Restore
To back up the configuration data, click
To restore the configuration data, browse to locate the file and press
. The device restarts.
26
6
5
to save the file.