InSTAllATIOn
sections
table of contents
Connecting to the network
Connect the network cable to the LAN port of the Switch . This must be
done before powering on the Switch .
Connecting the CAT5 cables
1 .
Connect one connector to the SIM's RJ45 port .
2 .
Connect the other connector to an available server port on
the Switch .
3 .
Follow the steps above for each computer .
Connecting the local console
To operate the system locally, connect a local console to the Switch:
1 .
Connect the monitor's cable to the Switch's console monitor port .
2 .
Connect the keyboard's cable to the Switch's console
keyboard port .
3 .
Connect the mouse's connector to the Switch's console
mouse port .
OmniView
SMB CAT5 216/232 Switch
®
1
2
3
4
Connecting the power supply
1 .
Using the power cord provided, connect the Switch to a socket
outlet with a grounding connection . Only use the power cord
supplied with the unit .
2 .
Power on the Switch . Allow approximately 45 seconds for boot up .
12
5