Table of Contents Table of Contents Package Contents Thank you for purchasing this Belkin Secure DisplayPort KVM . This Switch is designed for use in secure environment installations . The Switch offers safe centralized control, which prevents unintended data transfer between computers running at different security levels .
The product has been dropped or is physically damaged . o The product has obvious signs of breakage or loose internal parts . o AC Power plug or cable overheated, broken, or damaged . Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual...
Table of Contents Security Features Non-Reprogrammable Firmware The Belkin Secure DisplayPort KVM is the most advanced and secure commercially available KVM Switch available today . Below is a The Switch features custom firmware that is not reprogrammable, summary of all the security features incorporated into the Switch .
“Tear away” packaging ensures secure delivery of the Switch as it is routed to the end user . The recyclable packaging also breaks down The Belkin Secure DisplayPort KVM switch was evaluated in Canada flat, simplifying the cleanup process .
Table of Contents Equipment Requirements Cables Belkin highly recommends you use Belkin Display Port/USB KVM Cable Kits for your Switch to help ensure superior performance . These cables offer the highest quality possible to ensure optimal data and video transmission . One Cable Kit is required per connected computer .
• Other Linux distributions • Mac OS® X v10 .3 and higher Keyboards Do not connect DCU to anything but Belkin Secure KVMs via • USB-compatible or keyboard + mouse composite device (keyboards supplied RJ14 custom cable . with built-in USB hubs are not supported) .
Page 9
If for any reason the tamper-evident seal is missing, appears disrupted, or looks different than the example shown here, please call Belkin Technical Support at (800) 282-2355 . (F1DN104P model shown) Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual...
-4° to 140° F (-20° to 60° C) Console Keyboard Input: USB Type A Humidity: 0-80% RH, non-condensing Console Mouse Input: USB Type A Warranty: 3 years Console CAC Input: USB Type A Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual...
Page 14
Table of Contents Dimensions: (F1DN102P/104P) 12 .5 (W) x 1 .7 (H) x 6 .4 (L) inches (F1DN104W) 12 .5 (W) x 2 .5 (H) x 6 .4 (L) inches (F1DN104Q) 12 .5 (W) x 3 .8 (H) x 6 .4 (L) inches Weight: (F1DN102P/104P) 3 .9 lbs .
2 . 1 Power on the monitor . and mouse 2 .2 Power up the Belkin Secure DisplayPort KVM by connecting • The location of your computers in relation to your console the power . The display diagnostic LED should be solid green a few seconds after power up .
Page 16
Power up all the attached computers, and check for display and peripheral functionality . All computers can be powered on 3 .2 Using the Belkin DP/USB KVM Cable Kit (sold separately), simultaneously . connect the computers to a port on the rear of the KVM Switch .
. Refer to the installation area underneath the port-selector buttons for port identification . instructions below . Note: You may have to remove the existing black color chip first . Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual...
Please note that the default port at power-up is port 1 . In case of a power failure or if the power is cycled, the Switch will default to port 1 . Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual...
Page 19
CAC required for that computer or not . This allows the CAC to be the computer that requires CAC, and the other end to the CAC connected and controlled separately to the keyboard, mouse, video port on the Belkin Secure DisplayPort KVM that corresponds to and audio . the computer .
. If the unit’s enclosure appears disrupted or if all the port LEDs flash continuously, please call Belkin Technical Support at (800) 282-2355 . Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual...
Page 21
I connect to the Belkin Secure DisplayPort KVM . This is normal operation . The lock-state information is fully functional . Due to the security of the Belkin Secure DisplayPort KVM and known exploitation of lock-state information for leakages, the LED status is not supported .
Page 22
• Check to see if the LED is illuminated for the CAC reader . Switch . • Confirm that the CAC reader switch on the Belkin Secure • Check that the USB cable between the Switch and the computer DisplayPort KVM is properly set to the ON position .
Belkin International, Inc . (“Belkin”) warrants to the original purchaser ELECTROMAGNETIC COMPATIBILITY of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship . We, Belkin International, Inc ., of 12045 E . Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the What the period of coverage is .
Page 24
What is not covered by this warranty? 2 . Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to All above warranties are null and void if the Belkin product is not proceed with your claim .
Page 25
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES .
Page 26
After your communication is received, Belkin Government personnel will contact you to follow up . To ensure confidentiality, Belkin encourages you to use our PGP encryption key . The gov_security@belkin .com email address is not intended to reach technical support on Belkin Government products or services .