lOCAl ACCeSS
sections
table of contents
The Settings window – f2
Press "F2" . The Settings window appears (see Figure 30) .
Figure 30 Settings window
In the Settings window, navigate downward using the "Tab" key . At
the bottom of the window, press "Tab" to go to the top of the window .
Change settings by typing in the selected area or by pressing the space
bar, whichever is relevant .
From this window, you can do the following:
Changing the network parameters from the OSD is explained with the
initial configuration in the "Setting the IP Address" section on page 13 .
OmniView
SMB CAT5 216/232 Switch
®
1
2
3
4
HOT KeY – Pressing "Scroll Lock" twice in quick succession will make
the OSD appear . You can replace "Scroll Lock" with any of the other
hot-key options following:
•
Ctrl, Ctrl (left Ctrl key only)
•
Ctrl, F11 (left Ctrl key only)
•
Print Screen
Press the space bar to toggle between options . To display the OSD in
the future, press the new hot key .
KeYBOArd lAnGUAGe – Press the space bar to toggle between the
language options . It can be changed to French or German .
28
5