Table of Contents
Advertisement
InSTAllATIOn
sections
table of contents
rack-mounting the SMB CAT5 Switch
Rack-mount the Switch using the supplied rack-mount kit . The brackets
can be placed in two possible positions (see Figure 3) .
Figure 3 Bracket positions
OmniView
SMB CAT5 216/232 Switch
®
1
2
3
4
Place the brackets toward the front of the unit so that the unit can be
mounted front facing; or place the brackets toward the rear of the unit
so that it can be mounted rear facing on the back of a rack . Figure 4
illustrates the bracket connected for rear facing . Screw the bracket to
the Switch using the screws provided
Figure 4 Bracket connected
8
5
Advertisement
Table of Contents
