Table of Contents
Advertisement
WeB InTerfACe
sections
table of contents
lAn
Under LAN in Figure 14, is the following:
enable dHCP – When a DHCP server is active on the same network
to which the Switch is connected, DHCP provides automatic IP
assignment .
When dHCP is disabled (recommended) – You can assign a fixed IP
address to Switch .
Consult your network administrator regarding the use of the DHCP .
When DHCP is disabled, enter the IP Address, Subnet Mask, and
default Gateway for lAn, as given by your network administrator .
These parameters can be configured locally from the OSD as explained
on page 14 .
OmniView
SMB CAT5 216/232 Switch
®
1
2
3
4
Administration > User Settings
From the menu, click "User Settings" and Figure 16 appears .
Figure 16 User Settings
On this page, an administrator creates and edits users .
There are three levels of user access:
•
Administrator
•
User
•
View only
18
5
Advertisement
Table of Contents
