Table of Contents
Advertisement
WeB InTerfACe
sections
table of contents
logging in
To complete the initial setup via the web configuration interface:
1 .
Open your web browser (Internet Explorer version 6 .0 or higher) .
2 .
Type the Switch's system IP address—http or https://IP address/ -
and press "Enter" . The login page appears (see Figure 13) .
Figure 13 Login page
3 .
Type the default administrator user name (admin) and password
(SMBremote) (case-sensitive) .
4 .
Press "Enter" . The web interface opens at the Targets page (see
Figure 14) .
5 .
Bookmark the page for easy reference .
OmniView
SMB CAT5 216/232 Switch
®
1
2
3
4
Figure 14 Targets page
Columns:
Server name – The server name can be changed in the configuration
settings to give the server an identifiable name .
Port Status – Port status can be on, off, or busy (i .e ., another user is
accessing the server) .
Current User – The current user (if any) who is accessing the target .
16
5
Advertisement
Table of Contents
