Belt Clip & Optional Headset - AT&T E5937 User Manual

Getting started
Belt clip & optional headset
Install belt clip as shown below if desired.
For hands-free telephone conversations, you can use any industry standard 2.5 mm
headset (purchased separately). For best results, use an AT&T 2.5 mm headset.
Snap belt clip into
notches on both
sides of handset.
Plug 2.5 mm headset
into jack on side of
handset (beneath
small rubber cap).
12
To release belt clip from handset, press
on both flaps of the clip (as shown). Pull
and unlock one flap from the notch first
before detaching the whole belt clip from
handset.