Handset Settings; Directory - AT&T E5937 User Manual

Highlighted
menu item
>DIRECTORY
CALL LOG
RINGER VOLUME
RINGER TONE
1
KEY TONE
ON
Telephone operation

Handset settings

Using the feature menu you can change settings to
customize how the telephone works.
Press , then use the
MENU
feature you want to change. As you scroll through the
menu, the top menu item is always highlighted with a
> symbol. Press
SELECT
Press at any time to cancel an operation,
OFF/
CLEAR
back up to the previous menu, or exit the menu display.
Ringer volume
Using this menu you can set a ring volume level (1-6),
or turn the ringer off (0). Use the
a sample of each volume level, then press
select the one you prefer.
-OR-
When the handset is in idle mode, press VOLUME
buttons on the right side of the handset to change ringer
volume directly.
NOTE: The ringer volume level also determines the levels of ringing for
intercom calls (see page 17) and the paging tone when initiating the handset
locator feature (see page 14). If the handset ringer volume level is set to off
(0), that handset is silenced for all calls and paging.
Ringer tone
This feature allows you to choose one of 10 ringing
tones. Use the buttons to hear a sample of each
ringer tone, then press
prefer.
Key tone
The handset is factory programmed to beep at each key
press. Use the buttons to select
press to save your preference.
SELECT
NOTE: If you select
when you press keys.
20
buttons to scroll to the
to select the highlighted item.
buttons to hear
SELECT
to select the one you
SELECT
or
ON
, you will not hear the beep tone
OFF/
CLEAR
to
, then
OFF