Changing Feature Options - AT&T E5937 User Manual

1.
SETUP
Press until desired feature
is heard (see list at right).
2.
CHANGE
Press until desired selection
is heard.
3.
SETUP
Press to set selection and
move to next menu option.
- OR -
(Play/Stop)
Press to set selection and
exit setup.
NOTE: To switch off the
message alert tone for all incom-
ing messages, read the section
on disabling the message alert
function in the list on the right.
Answering system operation

Changing feature options

You can change how the answering system operates.
Press repeatedly to hear each feature. Press
SETUP
when you hear the feature you want to modify.
CHANGE
Feature options (Default settings underlined)
System announces:
"Announcement. Press PLAY
or press RECORD. To con-
tinue setup, press SETUP."
Options: [record announcement]
"Remote access code. To
change the setting press
CHANGE."
Options: [enter 2-digit code] 19
"Message alert. To change the
setting press CHANGE."
Options: On / Off
"Announcement only, record
no messages. To change the
setting press CHANGE."
Options: On / Off
"Base ringer. To change the
setting press CHANGE."
Options: On / Off
"Number of rings. To change
the setting press CHANGE."
Options: 2 / 4 / 6 /toll saver
NOTES:
1. Press and hold CHANGE to advance the remote access code number
by 10.
2. To temporarily disable the message alert tone, press any answering
machine key (TIME/SET, SETUP, CHANGE, REC/MEMO,
PLAY/STOP, DELETE,
VOLUME key on the base. This turns off the audio message alert tone
but the number in the message window will continue to flash as a remind-
er that there are unreviewed messages on the answering system. The
message alert tone will be re-activated with the next incoming message.
34
Feature description:
Press REC/MEMO to record you
outgoing announcement (see page 32).
Press STOP to stop recording.
Enter a two-digit number (10-99) for remote
access from another phone (see page 38).
When the answering system is turned
on (the ANSWER ON/OFF light
is lit) and the message alert function is
activated, any new incoming message
will increase the flashing number in the
message window by one, and a beep
tone will sound every ten seconds as a
reminder that there are unreviewed mes-
sages on the answering system.
When on, callers hear an announcement
but cannot leave messages (see page 33).
Choose this option to turn the base ringer
on or off (does not affect handset).
Choose number of rings before the system
answers a call. When toll saver is active,
the system answers after two rings if you
have new messages, and after four rings if
you have no new messages.
REPEAT and SKIP) or the